Barr Marine
866.255.9265
  • Home
    • About Us
    • Catalogs
    • Engine Exhaust Systems
    • Cross Over Reference Guide
    • Find a Distributor
  • Manifolds
    • Chevrolet Aluminum Exhaust System
    • Chris Craft
    • Chrysler
    • Crusader
    • Detroit Diesel
    • Flagship
    • Graymarine
    • Indmar
    • Interceptor
    • MerCruiser
    • OMC
    • Perkins
    • Pleasurecraft
    • Universal Atomic 4
    • Volvo Penta
    • Waukesha
  • Parts
    • Adaptor Bell Housings
    • Center Discharge Exhaust Riser
    • Center Discharge Manifold and Riser System Dimensions
    • Exhaust Risers and Connectors
    • Flame Arrestors
    • Rubber Engine Mounts
    • Thermostats & Thermostat Housing Assemblies
    • Torsional Dampers
  • Warranty
    • 3 Year Warranty
    • 1 Year Warranty
    • Untitled
    • Untitled
    • It's the Law
  • Contact Us

FLAGSHIP V8-283, 327 and 350 C.I.D.

ALL MODELS CENTER RISER GENERIC 
Picture

Part Number and Description

CHV-1-83 Water cooled center discharge manifold to fit the small block GM engine (3/4” N.P.T. cooling hose connections). All years. 

20-0082 Water cooled center discharge riser (3/4” N.P.T. cooling hose connection). Standard for use with 3” I.D. exhaust hose. 

20-0100 Water cooled center discharge riser (3/4” N.P.T. cooling hose connection). Standard for use with 4” I.D. exhaust hose. 

1-0104P Adaptor package for fresh water cooled manifold (includes gaskets and block off plate). 

1-0105 Center riser manifold-to-riser gasket for fresh water cooling. 

1-0106P Adaptor package for raw water cooling. Used in pre-heating applications (includes gaskets and block off plate with vent hole). 

1-0107 Center riser manifold-to-riser gasket (raw water cooling). 

20-0082P Riser mounting package for both 20-0082 and 20-0100. 

20-0082SS-P Stainless steel mounting package (with brass plugs) for both 20-0082 and 20-0100. Not pictured. 

20-0085P Straight exhaust adaptor (includes adaptor, hose and clamps). For use with 2 1/2” I.D. exhaust hose. 

20-0088P 30 degree exhaust elbow adaptor (includes adaptor, hose and clamps). For use with 2 1/2” I.D. exhaust hose. 

20-0089P 30 degree exhaust elbow adaptor (includes adaptor, hose and clamps). For use with 3” I.D. exhaust hose. 

20-0097 3” spacer block (complete with mounting hardware, gasket and 3/4” pipe plug). Capable of stacking. 

CHV-1-83P Manifold mounting package (includes bolts and pipe plugs). 

CHV-1-83SS-P Stainless steel manifold mounting package (includes stainless bolts and brass plugs). Not pictured. 

CHV-27-0083 Alternator bracket. Use where engine water pump is mounted on port side 

Note:
Manifold includes all plugs, gaskets and mounting hardware to head. Risers include plugs, gasket and mounting hardware to mount to manifold.

FLAGSHIP V8-283, 327 and 350 C.I.D.

LOG STYLE GENERIC
Picture

Part Number and Description

OF-1-60L Water cooled end discharge port manifold to fit the small block Chev- rolet (1/2” N.P.T. cooling hose connections). All years 

OF-1-60R Water cooled end discharge starboard manifold to fit the small block Chev-rolet (1/2” N.P.T. cooling hose con-nections). All years 

1-0019 End plate gasket (will fit both ends). 

20-0000 Swivel-type high discharge exhaust  riser; 8 1/2” riser protection. Requires (1) mounting hardware kit #20-0002P per riser. Use only with 2 7/8” to 3” I.D. exhaust hose. 

20-0002P Mounting hardware kit. 
20-0031 Swivel-type 90 degree exhaust elbow connector with internal water dis-charge. Accepts 2 1/2” to 3” I.D. ex-haust hose. Requires (1) mounting hardware kit #20-0002P per elbow.

20-0034 or 20-0035 Exhaust connector #20-0035 (for 2 1/2” I.D. exhaust hose) or exhaust connector #20-0034 (for 3” I.D. ex-haust hose). Connects to #20-0039 using (1) #20-0002P per connector. 

20-0039 Fully jacketed swivel-type exhaust Riser; 7” riser protection. Requires (2) mounting hardware kits #20-0002P (1) kit to mount riser to manifold and (1) kit to mount elbows 20-0034 or 20-0035 to riser). 

20-0055 Swivel-type 30 degree exhaust elbow connector; fully jacketed. Accepts 2 1/2” or 3” I.D. exhaust hose. Requires (1) mounting hardware kit #20-0002P per elbow. 

CHV-47-0000 Manifold to cylinder head gasket. 

OF-1-60F-P Manifold to cylinder head mounting package. 

Our Company

About Us
Engine Exhaust Systems
Cross Over Reference Guide
Find a Distributor

Manifolds and Risers

Chevrolet Aluminum Exhaust
Chris Craft
Chrysler
Crusader
Detroit Diesel
Flagship
Graymarine
Indmar
Interceptor
Mercruiser
OMC
Perkins
Pleasurecraft
Universal Atomic 4
Volvo Penta
Waukesha

Parts

Adaptor Bell Housings
Center Discharge Riser
Center Dishcharge Manifold & Riser System Dimensions
Exhaust Risers & Connectors
Flame Arrestors
Rubber Engine Mounts
Thermostats & Thermostat Assemblies

Warranty

3 Year Warranty
1 Year Warranty
Barr Marine by EDM |  100 Douglas Way Natural Bridge, VA  | 540.291.4180 
Picture
Barr Marine is actively working to make this website WCAG 2.0 compliant.  If you need assistance, please contact us at 866-255-9265.