Barr Marine
866.255.9265
  • Home
    • About Us
    • Catalogs
    • Product Installation Guidelines
    • Engine Exhaust Systems
    • Cross Over Reference Guide
    • Find a Distributor
  • Manifolds
    • Chevrolet Aluminum Exhaust System
    • Chris Craft
    • Chrysler
    • Crusader
    • Detroit Diesel
    • Flagship
    • Graymarine
    • Indmar
    • Interceptor
    • MerCruiser
    • OMC
    • Perkins
    • Pleasurecraft
    • Universal Atomic 4
    • Volvo Penta
    • Waukesha
  • Parts
    • Adaptor Bell Housings
    • Center Discharge Exhaust Riser
    • Center Discharge Manifold and Riser System Dimensions
    • Exhaust Risers and Connectors
    • Flame Arrestors
    • Rubber Engine Mounts
    • Thermostats & Thermostat Housing Assemblies
    • Torsional Dampers
  • Warranty
    • 3 Year Warranty
    • 1 Year Warranty
    • It's the Law
  • Contact Us

CHRIS CRAFT V8-283, 302, 305, 307 and 350 C.I.D

ALL MODELS LOG STYLE DIRECT REPLACEMENT
MANIFOLD NOT TO BE USED IN 3 PASS PLUMBING SYSTEMS!
Picture
Picture

Part Number and Description

 CC-1-07686 Direct replacement water cooled 16.20-07686. 
_______________________________________________________
CC-20-08288 Direct replacement port side riser. 
_______________________________________________________
CC-20-08289 Direct replacement starboard side riser. 
_______________________________________________________
CC-1-07686P Manifold mounting package. 
_______________________________________________________
CC-6-80 Pressure relief valve adaptor package for use with Chris Craft direct replacement as needed
_______________________________________________________
CC-20-07593 Riser/deflector plate. Replaces Chris Craft part #16.20-07593 (Order (2) of the appropriate gaskets according to your requirements). 
_______________________________________________________
CC-20-07605 Direct replacement exhaust elbow. 
_______________________________________________________
CC-20-0828P Exhaust riser mounting package. 
_______________________________________________________
CC47-1650-05944 End cap gasket for all models except 283 C.I.D. with flywheel forward (Order (2) of the appropriate gaskets according to your requirements). 
_______________________________________________________
CC47-1650-06022 End cap gasket for 283 C.I.D. with flywheel forward (Order (2) of the appropriate gaskets according to your requirements). 
_______________________________________________________
CC47-1650-07290 Pressure relief valve housing gasket. 
_______________________________________________________
CC47-1650-07596 Riser/deflector plate gasket. Also requires gasket CC47-1650-07597 (Order (2) of the appropriate gaskets according to your requirements). 
_______________________________________________________
CC47-1650-07597 Riser/tail pipe gasket. Also requires gasket CC47-1650-07596 (Order (2) of the appropriate gaskets according to your requirements). 
_______________________________________________________
CC47-1650-07681 Adaptor/tail pipe gasket for 283 
C.I.D. with flywheel forward (Order 2) of the appropriate gaskets  according to your requirements). 
_______________________________________________________
CHV-47-0000 Manifold to cylinder head gasket. 

Note:
Manifold includes all mounting hardware to head, gaskets and plugs. Risers include mounting gaskets and plugs only. Order CC-20-0828P to mount riser to manifold ((2) required per engine).

CHRIS CRAFT V8-283, 302, 305, 307, 327 and 350 C.I.D.

ALL MODELS GENERIC
Picture

Part Number and Description

1-0012L Adaptor for Chris Craft V8 283 C.I.D. Manifolds prior to Models F, G, K and Q (three pass manifold system) left side. Requires Chris Craft adaptor part #16.20-07602 (port side). 
_______________________________________________________
1-0012R Adaptor for Chris Craft V8 283 C.I.D. Manifolds prior to Models F, G, K and Q (three pass manifold system) right side. Requires Chris Craft adaptor part #16.20-07064 (starboard side). 
_______________________________________________________
1-0283A Adaptor for Chris Craft V8 283, 302, 305, 307, 327 and 350 C.I.D. Manifolds, Models F, G, and K (two pass manifold system). 
Not pictured. 
_______________________________________________________
1-0283L Adaptor for Chris Craft V8 283, 302, 305, 307, 327 and 350 C.I.D. ManiFolds, Model Q (single pass manifold system) left side. 
_______________________________________________________
1-0283L Adaptor for Chris Craft V8 283, 302, 305, 307, 327 and 350 C.I.D. Manifolds, Model Q (single pass manifold system) right side. 

_______________________________________________________
-0000 Swivel-type high discharge exhaust riser; 8 1/2” riser protection. Requires (1) mounting hardware kit #20-0002P per riser. Use only with 2 7/8” to 3” I.D. exhaust hose. 
_______________________________________________________
20-0002P Mounting hardware kit. 
_______________________________________________________
20-0031 Swivel-type 90 degree exhaust elbow connector with internal water discharge. Accepts 2 1/2” to 3” I.D. exhaust hose. Requires (1) mounting hardware kit #20-0002P per elbow. 
_______________________________________________________
20-0034 or 20-0035 Exhaust connector #20-0035 (for 2 1/2” I.D. exhaust hose) or exhaust connector #20-0034 (for 3” I.D. exhaust hose). Connects to #20-0039 using (1) #20-0002P per connector. 
_______________________________________________________
20-0039 Fully jacketed swivel-type exhaust riser; 7” riser protection. Requires (2) mounting hardware kits #20-0002P (1) kit to mount riser to manifold and (1) kit to mount elbows #20-0034 or #20-0035 to riser). Use for Models F, G, K, and Q; requires (1) CC-6-80 package. 
_______________________________________________________
20-0055 Swivel-type 30 degree exhaust elbow connector; fully jacketed. Accepts 2 1/2” or 3” I.D. exhaust hose. Requires (1) mounting hardware kit #20-0002P per elbow. 
_______________________________________________________
CC-6-80 Pressure relief valve adaptor package for Chris Craft V8 Models F, G, K, and Q. Use with #20-0039 riser. 
_______________________________________________________
CC47-1650-05944 End cap gasket for all models except 283 C.I.D. with flywheel forward (Order (2) of the appropriate gaskets according to your requirements). 
_______________________________________________________
CC47-1650-06022 End gasket for 283 C.I.D. with flywheel forward (Order (2) of the appropriate gaskets according to your requirements) 

CHRIS CRAFT V8-283, 302, 305, 307, 327 and 350 C.I.D.

ALL MODELS CENTER RISER GENERIC
Picture

Part Number and Description

CHV-1-83 Water cooled center discharge manifold to fit the small block GM engine (3/4” N.P.T. cooling hose connections). All years. 
_______________________________________________________ 20-0082 Water cooled center discharge riser (3/4” N.P.T. cooling hose coNnection). Standard for use with 3” I.D. exhaust hose. 
_______________________________________________________
20-0100 Water cooled center discharge riser (3/4” N.P.T. cooling hose connection). Standard for use with 4” I.D. exhaust hose. 
_______________________________________________________
1-0104P Adaptor package for fresh water cooled manifold (includes gaskets and block off plate). 
_______________________________________________________
1-0105 Center riser manifold-to-riser gasket for fresh water cooling. 
_______________________________________________________
1-0106P Adaptor package for raw water cooling. Used in pre-heating applications (includes gaskets and block off plate with vent hole). 
_______________________________________________________
1-0107 Center riser manifold-to-riser gasket (raw water cooling). 
_______________________________________________________
20-0082P Riser mounting package for both 20-0082 and 20-0100. 
_______________________________________________________
20-0082SS-P Stainless steel mounting package (with brass plugs) for both 20-0082 and 20-0100. Not pictured. 
_______________________________________________________
20-0085P Straight exhaust adaptor (includes adaptor, hose and clamps). For use with 2 1/2” I.D. exhaust hose. 
_______________________________________________________
20-0086P 90 degree exhaust elbow adaptor (includes adaptor, hose and clamps). For use with 2 1/2” I.D. exhaust hose
_______________________________________________________
20-0088P 30 degree exhaust elbow adaptor (includes adaptor, hose and clamps). For use with 2 1/2” I.D. exhaust hose. 
_______________________________________________________
20-0089P 30 degree exhaust elbow adaptor (includes adaptor, hose and clamps). For use with 3” I.D. exhaust hose. 
_______________________________________________________
20-0097 3” spacer block (complete with mounting hardware, gasket and 3/4” pipe plug). Capable of stacking. 
_______________________________________________________
CC-27-79 Alternator bracket. Use where engine water pump is mounted on the starboard side of the engine. 
_______________________________________________________
CHV-1-83P Manifold mounting package (includes bolts and pipe plugs). 
_______________________________________________________
CHV-1-83SS-P Stainless steel manifold mounting package (includes stainless bolts and brass plugs). Not pictured. 
_______________________________________________________
CHV-27-0083 Alternator bracket. Use where engine water pump is mounted on port side of engine below alternator.
_______________________________________________________
CHV-47-0000 Manifold to cylinder head gasket.



Note: 
Manifold includes all plugs, gaskets and mounting hardware to head. Risers include plugs, gasket and mounting hardware to mount to manifold. 


CHRIS CRAFT V8-454 C.I.D.

ALL MODELS CENTER RISE GENERIC
Picture

Part Number and Description

CHVA-1-84 Water cooled center discharge maniFold to fit the big block GM engine (3/4” N.P.T. cooling hose connections). All years. 

_______________________________________________________ 20-0082 Water cooled center discharge riser (3/4” N.P.T. cooling hose connection). Standard for use with 3” I.D. exhaust hose. 
_______________________________________________________
20-0100 Water cooled center discharge riser (3/4” N.P.T. cooling hose connection). Standard for use with 4” I.D. exhaust hose. 

_______________________________________________________
1-0104P Adaptor package for fresh water cooled manifold (includes gaskets and block off plate). 
_______________________________________________________
1-0105 Center riser manifold-to-riser gasket for fresh water cooling. 
_______________________________________________________
1-0106P Adaptor package for raw water cooling. Used in pre-heating applications (includes gaskets and block off plate with vent hole). 
_______________________________________________________
1-0107 Center riser manifold-to-riser gasket (raw water cooling). 
_______________________________________________________
20-0082P Riser mounting package for both 20-0082 and 20-0100. 
_______________________________________________________
20-0082SS-P Stainless steel mounting package with brass plugs) for both 20-0082 and 20-0100. Not pictured.
_______________________________________________________
20-0084P Straight exhaust adaptor (includes adaptor, hose and clamps).   For use with 3 1/2” I.D. exhaust hose. 
_______________________________________________________
20-0085P Straight exhaust adaptor (includes 20 0087P adaptor, hose and clamps). For use with 2 1/2” I.D. exhaust hose. 
_______________________________________________________
20-0086P 90 degree exhaust elbow adapt 
_______________________________________________________
20-0087P 90 degree exhaust elbow adaptor (includes adaptor, hose and clamps). 20 0093P For use with 3” I.D. exhaust hose. 20 0092P 
_______________________________________________________
20-0088P 30 degree exhaust elbow adaptor (includes adaptor, hose and clamps). For use with 2 1/2” I.D. exhaust hose. 
_______________________________________________________
20-0089P 30 degree exhaust elbow adaptor (includes adaptor, hose and clamps). For use with 3” I.D. exhaust hose. 
_______________________________________________________
20-0092P 45 degree exhaust elbow adaptor (includes adaptor, hose and clamps). For use with 3” I.D. exhaust hose. 
_______________________________________________________
20-0093P 90 degree exhaust elbow adaptor (includes adaptor, hose and clamps). For use with 3 1/2” or 4” I.D. exhaust hose. 
_______________________________________________________
20-0097 3” spacer block (complete with mounting hardware, gasket and 3/4” pipe plug). Capable of stacking. 
_______________________________________________________
CHVA-1-84P Manifold mounting package (includes bolts and pipe plugs). 
_______________________________________________________
CHVA-1-84SS-P Stainless steel manifold mounting _______________________________________________________
CHVA-47-0000 Manifold to cylinder head gasket. 

Note:
Manifold includes all plugs, gaskets and mounting hardware
to head. Risers include plugs, gasket and mounting hardware to mount to manifold.




PRODUCT INSTALLATION GUIDELINES
DOWNLOAD

Our Company

About Us
Engine Exhaust Systems
Cross Over Reference Guide 
Catalog
Product Installation Guide
Find a Distributor

Manifolds and Risers

Chevrolet Aluminum Exhaust
Chris Craft
Chrysler
Crusader
Detroit Diesel
Flagship
Graymarine
Indmar
Interceptor
Mercruiser
OMC
Perkins
Pleasurecraft
Universal Atomic 4
Volvo Penta
Waukesha

Parts

Adaptor Bell Housings
Center Discharge Riser
Center Dishcharge Manifold & Riser System Dimensions
Exhaust Risers & Connectors
Flame Arrestors
Rubber Engine Mounts
Thermostats & Thermostat Assemblies

Warranty

3 Year Warranty
1 Year Warranty
Barr Marine by EDM |  100 Douglas Way Natural Bridge, VA  | 540.291.4180 
Picture
Barr Marine is actively working to make this website WCAG 2.0 compliant.  If you need assistance, please contact us at 866-255-9265.