Barr Marine
866.255.9265
  • Home
    • About Us
    • Catalogs
    • Engine Exhaust Systems
    • Cross Over Reference Guide
    • Find a Distributor
  • Manifolds
    • Chevrolet Aluminum Exhaust System
    • Chris Craft
    • Chrysler
    • Crusader
    • Detroit Diesel
    • Flagship
    • Graymarine
    • Indmar
    • Interceptor
    • MerCruiser
    • OMC
    • Perkins
    • Pleasurecraft
    • Universal Atomic 4
    • Volvo Penta
    • Waukesha
  • Parts
    • Adaptor Bell Housings
    • Center Discharge Exhaust Riser
    • Center Discharge Manifold and Riser System Dimensions
    • Exhaust Risers and Connectors
    • Flame Arrestors
    • Rubber Engine Mounts
    • Thermostats & Thermostat Housing Assemblies
    • Torsional Dampers
  • Warranty
    • 3 Year Warranty
    • 1 Year Warranty
    • Untitled
    • Untitled
    • It's the Law
  • Contact Us

INTERCEPTOR V8-239, 256, 272, 292 and 312 C.I.D.

Models 125, 135, 150, 170, 185 and 215 H.P. LOG STYLE GENERIC 
Picture

Part Number and Description

INT-1-5457L Water cooled exhaust manifold (port side) for the Ford engine. Use with 

INT-1-5457R Water cooled exhaust manifold (starboard) for the Ford engine. Use with Barr risers and exhaust connectors. The original Interceptor exhaust connectors are not applicable to the Barr manifolds. 

1-0022 End plate gasket (will fit both ends). 
INT-1-5457P Manifold to cylinder head mounting KIT.

20-0000 Swivel-type high discharge exhaust riser; 8 1/2” riser protection. Requires (1) mounting hardware kit #20-0002P per riser. Use only with 2 7/8” to 3” I.D. exhasut hose. 

20-0002P Mounting hardware kit (Barr style riser/elbows only). 

20-0031 Swivel-type 90 degree exhaust elbow connector with internal water dis-charge. Accepts 2 1/2” to 3” I.D. ex-haust hose. Requires (1) mounting hardware kit #20-0002P per elbow.

20-0034 or 20-0035 Exhaust connector #20-0035 (for 2 1/2” I.D. exhaust hose) or exhaust connector #20-0034 (for 3” I.D. exHaust hose). Connects to #20-0039 using (1) #20-0002P per connector. 

20-0039 Fully jacketed swivel-type exhaust riser; 7” riser protection. Requires (2) mounting hardware kits #20-0002P (1) kit to mount riser to manifold and (1) kit to mount elbows 20-0034 or 20-0035 to riser). 

20-0055 Swivel-type 30 degree exhaust elbow connector; fully jacketed. Accepts 2 1/2” or 3” I.D. exhaust hose. Requires (1) mounting hardware kit #20-0002P per elbow. 

INTERCEPTOR V8-221, 260 and 289 C.I.D.

Models 120, 140, 165, 190, 200 and 210 H.P. LOG STYLE GENERIC 
Picture

Part Number and Description

INT-1-6268L Water cooled exhaust manifold (port) for the Ford engine. Use with Barr risers and connectors. The original Interceptor exhaust connectors are not applicable to the Barr manifolds. 

INT-1-6268R Water cooled exhaust manfold (starboard for the Ford engine. Use with the Barr risers and connectors. The original Interceptor exhaust connectors are not applicable to the Barr manifolds. 

1-0022 End plate gasket (will fit both ends 

INT-1-6268P Manifold to cylinder head mounting kit. 


20-0000 Swivel-type high discharge exhaust riser; 8 1/2” riser protection. Requires (1) mounting hardware kit #20-0002P per riser. Use only with 2 7/8” to 3” I.D. exhaust hose. 

20-0002P Mounting hardware kit (Barr style riser/elbows only). 

20-0031 Swivel-type 90 degree exhaust elbow connector with internal water dis-charge. Accepts 2 1/2” to 3” I.D. ex-haust hose. Requires (1) mounting hardware kit #20-0002P per elbow.

20-0034 or 20-0035 Exhaust connector #20-0035 (for 2 1/2” I.D. exhaust hose) or exhaust connector #20-0034 (for 3” I.D. exhaust hose). Connects to #20-0039 using (1) #20-0002P per connector. 

20-0039 Fully jacketed swivel-type exhaust riser; 7” riser protection. Requires (2) mounting hardware kits #20-0002P (1) kit to mount riser to manifold and (1) kit to mount elbows 20-0034 or 20-0035 to riser). 

20-0055 Swivel-type 30 degree exhaust elbow connector; fully jacketed. Accepts 2 1/2” or 3” I.D. exhaust hose. Requires (1) mounting hardware kit #20-0002P per elbow 

INTERCEPTOR V8-352, 390 and 427 C.I.D.

Models 240, 250, 260, 285, and 300 H.P. LOG STYLE GENERIC 
Picture

Part Number and Description

INT-1-58L Water cooled exhaust manifold (port) for the Ford engine. Use with Barr risers and connectors. The original Interceptor exhaust connectors are not applicable to the Barr manifolds. 

INT-1-58R Water cooled exhaust manifold (starboard) for the Ford engine. Use with Barr risers and connectors. The original Interceptor exhaust connectors are not applicable to the Barr manifolds. 

1-0019 End plate gasket (will fit both ends). 

INT-1-58P Manifold to cylinder head mounting kit. 

20-0000 Swivel-type high discharge exhaust riser; 8 1/2” riser protection. Requires (1) mounting hardware kit #20-0002P per riser. Use only with 2 7/8” to 3” I.D. exhasut hose. 

20-0002P Mounting hardware kit (Barr style riser/elbows only). 

20-0031 Swivel-type 90 degree exhaust elbow connector with internal water discharge. Accepts 2 1/2” to 3” I.D. exhaust hose. Requires (1) mounting hardware kit #20-0002P per elbow

20-0034 or 20-0035 Exhaust connector #20-0035 (for 
2 1/2” I.D. exhaust hose) or exhaust connector #20-0034 (for 3” I.D. exhaust hose). Connects to #20-0039 using (1) #20-0002P per connector. 

20-0039 Fully jacketed swivel-type exhaust riser; 7” riser protection. Requires (2) mounting hardware kits #20-0002P (1) kit to mount riser to manifold and (1) kit to mount elbows 20-0034 or 20-0035 to riser). 

20-0055 Swivel-type 30 degree exhaust elbow connector; fully jacketed. Accepts 2 1/2” or 3” I.D. exhaust hose. Requires (1) mounting hardware kit #20-0002P per elbow. 

INTERCEPTOR V8-221. 260, 289, 302 and C.I.D.

ALL MODELS CENTER RISER GENERIC 
Picture

Part Number and Description

FM-1-83 Water cooled center discharge mani-fold to fit the small block Ford engine (3/4” N.P.T. cooling hose connections). All years. 

20-0082 Water cooled center discharge riser (3/4” N.P.T. cooling hose connection). Standard for use with 3” I.D. exhaust hose. 

20-0100 Water cooled center discharge riser (3/4” N.P.T. cooling hose coNnection). Standard for use with 4” I.D. exhaust hose. 

1-0104P Adaptor package for fresh water cooled manifold (includes gaskets and block off plate). 

1-0105 Center riser manifold-to-riser gasket or fresh water cooling. 

1-0106P Adaptor package for raw water cooling. Used in pre-heating applications (includes gaskets and block off plate with vent hole). 

1-0107 Center riser manifold-to-riser gasket (raw water cooling). 

20-0082P Riser mounting package for both 20-0082 and 20-0100. 

20-0082SS-P Stainless steel mounting package (with brass plugs) for both 20-0082 and 20-0100. Not pictured. 

20-0084P Straight exhaust adaptor (includes adaptor, hose and clamps). For use with 3 1/2” I.D. exhaust hose. 

20-0085P Straight exhaust adaptor (includes adaptor, hose and clamps). For use with 2 1/2” I.D. exhaust hose. 

20-0086P 90 degree exhaust elbow adaptor (includes adaptor, hose and clamps). For use with 2 1/2” I.D. exhaust hose.

20-0087P 90 degree exhaust elbow adaptor (includes adaptor, hose and clamps). For use with 3” I.D. exhaust hose. 

20-0088P 30 degree exhaust elbow adaptor (includes adaptor, hose and clamps). For use with 2 1/2” I.D. exhaust hose. 

20-0089P 30 degree exhaust elbow adaptor (includes adaptor, hose and clamps). For use with 3” I.D. exhaust hose. 

20-0092P 45 degree exhaust elbow adaptor (includes adaptor, hose and clamps). For use with 3” I.D. exhaust hose. 

20-0093P 90 degree exhaust elbow adaptor (includes adaptor, hose and clamps). For use with 3 1/2” or 4” I.D. exhaust HOSE.

20-0097 3” spacer block (complete with mounting hardware, gasket and 3/4” pipe plug). Capable of stacking. 

FM-1-83P Manifold mounting package (includes bolts and pipe plugs). 

FM-1-83SS-P Stainless steel manifold mounting package (includes stainless bolts and brass plugs). Not pictured. 

Note:
Manifold includes all plugs, gaskets and mounting hardware to
head. Risers include plugs, gasket and mounting hardware to mount to manifold.


Our Company

About Us
Engine Exhaust Systems
Cross Over Reference Guide
Find a Distributor

Manifolds and Risers

Chevrolet Aluminum Exhaust
Chris Craft
Chrysler
Crusader
Detroit Diesel
Flagship
Graymarine
Indmar
Interceptor
Mercruiser
OMC
Perkins
Pleasurecraft
Universal Atomic 4
Volvo Penta
Waukesha

Parts

Adaptor Bell Housings
Center Discharge Riser
Center Dishcharge Manifold & Riser System Dimensions
Exhaust Risers & Connectors
Flame Arrestors
Rubber Engine Mounts
Thermostats & Thermostat Assemblies

Warranty

3 Year Warranty
1 Year Warranty
Barr Marine by EDM |  100 Douglas Way Natural Bridge, VA  | 540.291.4180 
Picture
Barr Marine is actively working to make this website WCAG 2.0 compliant.  If you need assistance, please contact us at 866-255-9265.