CHRYSLER V8-273, 318, 340 and 360 C.I.D.

ALL MODELS.  1986 AND UP CENTER RISER DIRECT REPLACEMENT

Part Number and Description

CM-1-4417063 Water cooled center discharge exhaust manifold to fit the small block Chrysler (1/2” N.P.T. cooling hose connections). Used during years 1986 and later. 
_______________________________________________________
534005 Generic riser designed to be mounted to the original Chrysler center riser exhaust manifold (for use with 3” I.D. exhaust hose/3/4” N.P.T. cooling hose connection). 
_______________________________________________________
534002 Adaptor kit (sold as shown) to fit the original Chrysler center riser exhaust manifold to the Barr style riser (part #534005). Adaptor must be used for CM 1 4417063 Barr style riser. 
_______________________________________________________
534004 Riser gasket for raw water cooled manifolds (installed between manifold and adaptor plate). 
_______________________________________________________
50-512-018 1/2” N.P.T. X 3/4” hose (straight barb) brass fitting. 
_______________________________________________________
50-512-019 3/4” N.P.T. X 3/4” hose (straight barb) brass fitting. 
_______________________________________________________
50-525-018 1/2” N.P.T. X 3/4” hose (90 degree) brass fitting 
_______________________________________________________
50-525-019 3/4” N.P.T. X 3/4” hose (90 degree) brass fitting. 
_______________________________________________________
CM47-4417127 Riser gasket for raw water cooled manifolds (installed between adaptor 534005 plate and riser). 
_______________________________________________________
CM47-4417232 Riser gasket for fresh water cooled manifolds (installed between manifold and adaptor plate).

Note: Manifold includes all mounting hardware, gaskets and plugs.

CHRYSLER V8-273, 318, 340 and 360 C.I.D.

ALL MODELS.  1966 AND UP LOG STYLE DIRECT REPLACEMENT

Part Number and Description

CM-1-6672A Direct replacement water cooled manifold for model years 1966 to 1972. 
_______________________________________________________
CM-1-6677A Direct replacement water cooled manifold for model years 1973 to 1986. 
_______________________________________________________
CM-20-2600402 Exhaust riser lower elbow. Direct replacement for Chrysler part # 2600402. 
_______________________________________________________
CM-20-2847405 90 degree exhaust elbow. Direct re-placement for Chrysler part #’s 2847405 and 2469639. 
_______________________________________________________
CM-20-4142411 Exhaust riser/upper elbow. Direct replacement for Chrysler part #’s 3745639, 2847623, 2487404 and E9233M. 
_______________________________________________________
CM-20-6672 Fully jacketed 20 degree exhaust elbow. CM 20 2847405 Accepts 3” I.D. exhaust hose. Direct replacement for Chrysler part # 3527794. Will mount directly to manifold or can be used with riser # CM-20-6674. 
_______________________________________________________
CM-20-6674 Fully jacketed exhaust riser. 6” riser protection. Direct replacement for Chrysler part # 2846689. 
_______________________________________________________
CM-20-9232 6” exhaust elbow high riser extension. Direct replacement for Chrysler part # E9232M. 
_______________________________________________________
CM-1-6672B Front end plate without the water CM 20 2600402 
connector, (1) required per manifold (Chrysler part # 2846106). May require mounting kit # CM-1-6672B-P (shown on next page). Order the appropriate end flanges and fittings according to your requirements. 
_______________________________________________________
CM-1-6672C Adaptor for rear end of manifold. Use with Barr style exhaust risers or elbows, (1) required per manifold. 
_______________________________________________________
CM-1-6672E Copper water distribution tube, (1) CM 1 6672C 
CM 1 6672H required per manifold. Replaces original tube (Chrysler part # 3527781) where used. Will fit both manifold styles. 
_______________________________________________________
CM-1-6672H Front end plate with 1/2” N.P.T. water connection. For use where water connection is made from the front of the manifold. Will replace Chrysler part # 3527869, (1) required per manifold. 
May require mounting kit # CM-1-6672B-P (show on next page).  Will fit both manifold styles. 
_______________________________________________________
CM-1-6677P Manifold to cylinder head mounting kit (Order (1) of the appropriate mounting kits according to your requirements). 
_______________________________________________________
CM-1-6677SS-P Stainless steel manifold to cylinder head mounting kit (includes stainless studs, nuts, manifold to head gaskets and brass drain plugs). Not pictured. 
_______________________________________________________
CM-20-6672P Mounting kit for exhaust elbow con-nector for raw water cooled manifold (includes bolts, gasket and pipe plug). 

Note:
CM-1-6672A, CM-1-6677A, CM-20-6672, CM-20-6674 and CM-20-2847405 include all mounting hardware, gaskets and plugs. Swivel-style connector packages must be purchased seperate for the corresponding riser/elbows. See associated page for part numbers.

CHRYSLER V8-273, 318, 340 and 360 C.I.D.

ALL MODELS.  1966 AND UP LOG STYLE DIRECT REPLACEMENT

Part Number and Description

CM-1-6672D End flange gasket for raw water cooled manifolds, (2) required per manifold. Replaces Chrysler part # 2847480. Will fit both manifold styles. 
_______________________________________________________
CM-1-6672J End flange gasket for fresh water cooled manifolds, (1) required per exhaust end. Will fit both manifold styles. 
_______________________________________________________
CM-1-6672P Manifold to cylinder head gasket set, (1) required per engine. Replaces Chrysler part # 3745220. Will fit both manifold styles. 
_______________________________________________________
CM-20-1947617 Exhaust elbow extension retainer. 
_______________________________________________________
CM-20-2600402P Mounting kit for lower elbow riser (includes bolts, gasket and pipe plugs). 
_______________________________________________________
CM-20-2847405P Mounting kit for exhaust elbow (in-cludes bolts, gasket and pipe plugs). 
_______________________________________________________
CM-20-4142411P Mounting kit for upper riser/elbow (includes sleeve, O-rings, retainers, bolts and pipe plugs). 
_______________________________________________________
CM-20-6672J-P Mounting kit for exhaust elbow connector for fresh water cooled manifold (includes bolts, gasket, and pipe plugs). 
_______________________________________________________
CM-20-6674J-P Mounting kit for exhaust riser for fresh water cooled manifold (includes bolts, gasket and pipe plug). 
_______________________________________________________
CM-20-6674P Mounting kit for raw water cooled manifold (includes bolts, gasket and pipe plugs). 
_______________________________________________________
CM-20-9232P Mounting kit for 6” extension (includes sleeve, O-rings, retainers and bolts). 
_______________________________________________________
CM-20-9224 Exhaust to elbow extension retainer sleeve. 
_______________________________________________________
CM-20-9225 Exhaust to elbow extension inner seal. 
_______________________________________________________ CM-20-9226 Exhaust to elbow extension outer seal. 
_______________________________________________________
CM-50-115729 Stainless steel exhaust manifold stud NUT.
_______________________________________________________

CM-50-602593 Stainless steel exhaust manifold stud. 

CHRYSLER V8-361, 383, 400, 426 and 440 C.I.D

ALL MODELS.  1959 AND UP LOG STYLE DIRECT REPLACEMENT

Part Number and Description

CM-1-5972A Direct replacement water cooled manifold for big block Chrysler. 
_______________________________________________________
CM-20-4142411 Exhaust riser/upper elbow. Direct Replacement for Chrysler part #’s 3745639, 2847623, 2847404 and E9233M. 
_______________________________________________________
CM-20-9232 6” exhaust elbow high riser extention. Direct replacement for Chrysler part # E9232M. 
_______________________________________________________ CM-20-9234 Exhaust riser lower elbow. Direct replacement for Chrysler part # E9234M.1-0007 Adaptor for rear end of manifold. Use 
with Barr style exhaust risers or elbow connectors. 
_______________________________________________________
1-0067 2 1/2” N.P.T. threaded exhaust end plate. 
_______________________________________________________
CM-1-5972B Direct replacement front end plate. 
_______________________________________________________
CM-1-5972C End plate gasket, (2) required per manifold. 
_______________________________________________________
CM-1-5972D Copper water distribution tube. Replaces original tube where used. 
_______________________________________________________
CM-1-5972G-P Manifold to cylinder head mounitng kit (includes bolts, manifold to head gaskets and brass drain plug). 
_______________________________________________________
CM-1-5972P Manifold to cylinder head mounting gasket set. 
_______________________________________________________
CM-1-5972SS-P Manifold to cylinder head mounting kit (includes stainless steel studs and nuts, manifold to head gaskets and 
brass drain plugs). 
_______________________________________________________
CM-20-1947617 Exhaust elbow extension retainer. 
_______________________________________________________
CM-20-4142411P Mounting kit for upper riser/elbow (includes sleeve, O-rings, retainers, bolts and pipe plugs). 
_______________________________________________________
CM-20-9224 Exhaust elbow to extension seal retainer sleeve. 
_______________________________________________________
CM-20-9225 Exhaust elbow to extension inner seal. 
_______________________________________________________
CM-20-9226 Exhaust elbow to extension outer seal. 
_______________________________________________________
CM-20-9232P Mounting kit for 6” extension (includes sleeve, O-rings, clamps and bolts). 
_______________________________________________________
CM-20-9234P Mounitng kit for lower elbow riser (includes bolts, gasket and pipe plugs). 
_______________________________________________________
CM-50-114942 Stainless steel exhaust manifold stud nut. 
_______________________________________________________
CM-50-5023040 Stainless steel exhaust manifold stud. 

Note:
Manifold includes gaskets and plugs. Swivel-style connector packages must be purchased seperate for the corresponding riser/elbows. Manifold mounting hardware must be purchased seperately.