CRUSADER V8-282, 302, 305, 307, 327 AND 350 C.I.D.
ALL MODELS CENTER RISER GENERIC
|
Part Number and DescriptionCHV-1-83 Water cooled center discharge manifold to fit the small block GM engine (3/4” N.P.T. cooling hose connections). All years.
20-0082 Water cooled center discharge riser (3/4” N.P.T. cooling hose connection). Standard for use with 3” I.D. exhaust hose. 20-0100 Water cooled center discharge riser (3/4” N.P.T. cooling hose con-nection). Standard for use with 4” I.D. exhaust hose. 1-0104P Adaptor package for fresh water cooled manifold (includes gaskets and block off plate). 1-0105 Center riser manifold-to-riser gasket for fresh water cooling. 1-0106P Adaptor package for raw water cooling. Used in pre-heating applications (includes gaskets and block off plate with vent hole). 1-0107 Center riser manifold-to-riser gasket (raw water cooling). 20-0082P Riser mounting package for both 20-0082 and 20-0100. 20-0082SS-P Stainless steel mounting package (with brass plugs) for both 20-0082 and 20-0100. Not pictured. 20-0085P Straight exhaust adaptor (includes adaptor, hose and clamps). For use with 2 1/2” I.D. exhaust hose. 20-0086P 90 degree exhaust elbow adaptor (includes adaptor, hose and clamps). For use with 2 1/2” I.D. exhaust hose. 20-0088P 30 degree exhaust elbow adaptor (includes adaptor, hose and clamps). For use with 2 1/2” I.D. exhaust hose. 20-0089P 30 degree exhaust elbow adaptor (includes adaptor, hose and clamps). For use with 3” I.D. exhaust hose. 20-0097 3” spacer block (complete with mounting hardware, gasket and 3/4” pipe plug). Capable of stacking. CHV-1-83P Manifold mounting package (includes bolts and pipe plugs). CHV-1-83SS-P Stainless steel manifold mounting package (includes stainless bolts and brass plugs). Not pictured. CHV-27-0083 Alternator bracket. Use where engine water pump is mounted on port side of engine below alternator. CHV-47-0000 Manifold to cylinder head gasket. Note: Manifold includes all plugs, gaskets and mounting hardware to head. Risers include plugs, gasket and mounting hardware to mount to manifold. |
CRUSADER V8-282, 302, 305, 307, 327 AND 350 C.I.D.
ALL MODELS DIRECT REPLACEMENT
|
Part Number and DescriptionCR-1-97752 Direct replacement starboard side manifold. Replaces
Crusader part # 97752. CR-1-97753 Direct replacement port side manifold. Replaces Crusader part # 97753. CR-20-96560 Direct replacement exhaust elbow assembly, 3” I.D. exhaust hose. Re-places Crusader part # 96560. CR-20-97169 6” riser extension. Replaces Crusader part # 97169. CR-20-97386 90 degree swivel elbow. Replaces Crusader part # 97386. CR-20-97387 Elbow, lower swivel with 3” outlet. Replaces Crusader part # 97387. CR-20-97624 Elbow, lower swivel with 4” outlet. Replaces Crusader part # 97624. CR-20-97772 4” riser extension. Replaces Crusader part # 97772. CR-20-97924 Direct replacement exhaust elbow assembly, 4” I.D. exhaust hose. Replaces Crusader part # 97924. CR-20-98068 Direct replacement exhaust elbow assembly, 3” I.D. exhaust hose. For use without Crusader spacer part # 97295. Replaces Crusader part # 98068. CHV-47-0000 Manifold to cylinder head gasket. Note: Manifolds and elbows include all mounting hardware, gaskets and plugs. CR-20-97169P and CR-20-97772P must be purchased seperate for the corresponding risers. |
CRUSADER V8-283, 305, 307, 327 and 350 C.I.D.
CENTER RISER DIRECT REPLACEMENT
|
Part Number and DescriptionCR-1-98243 Direct replacement water cooled exhaust manifold. Replaces Crusader part # 98243.
CR-20-98216 Direct replacement water cooled center discharge riser. Replaces Crusader part # 98126. Accepts 4” I.D. exhaust hose. CR-20-98128 Manifold to riser 3” spacer block (single). Replaces Crusader part # 98128. CHV-47-0000 Manifold to cylinder head gasket. CR-1-98243P Mounting package for CR-1-98243. CR-20-98124 Stainless steel block off plate for closed cooling applications. CR-20-98126P Mounting package for CR-20-98126 riser. CR-20-98128P Mounting package for CR-20-98128 spacer. CR47-C-98127 Direct replacement manifold to riser gasket Note: Manifold, riser and spacer block include all mounting hardware, gaskets and plugs. |
CRUSADER V8-427 and 454 C.I.D.
ALL MODELS CENTER RISER GENERIC
|
Part Number and DescriptionCHVA-1-84 Water cooled center discharge manifold to fit the big block GM engine (3/4” N.P.T. cooling hose connections). All years.
20-0082 Water cooled center discharge riser (3/4” N.P.T. cooling hose connection). Standard for use with 3” I.D. exhaust hose. 20-0100 Water cooled center discharge riser (3/4” N.P.T. cooling hose connection). Standard for use with 4” I.D. exhaust hose. 1-0104P Adaptor package for fresh water cooled manifold (includes gaskets and block off plate). 1-0105 Center riser manifold-to-riser gasket for fresh water cooling. 1-0106P Adaptor package for raw water cooling. Used in pre-heating applications (includes gaskets and block off plate with vent hole). 1-0107 Center riser manifold-to-riser gasket (raw water cooling). 20-0082P Riser mounting package for both 20-0082 and 20-0100. 20-0082SS-P Stainless steel mounting package (with brass plugs) for both 20-0082 and 20-0100. Not pictured. 20-0084P Straight exhaust adaptor (includes adaptor, hose and clamps). For use 20-0085P Straight exhaust adaptor (includes adaptor, hose and clamps). For use with 2 1/2” I.D. exhaust hose. 20-0086P 90 degree exhaust elbow adaptor (includes adaptor, hose and clamps). For use with 2 1/2” I.D. exhaust hose. 20-0087P 90 degree exhaust elbow adaptor (includes adaptor, hose and clamps). For use with 3” I.D. exhaust hose. 20-0088P 30 degree exhaust elbow adaptor (includes adaptor, hose and clamps). For use with 2 1/2” I.D. exhaust hose. 20-0089P 30 degree exhaust elbow adaptor (includes adaptor, hose and clamps). For use with 3” I.D. exhaust hose. 20-0092P 45 degree exhaust elbow adaptor (includes adaptor, hose and clamps). For use with 3” I.D. exhaust hose. 20-0093P 90 degree exhaust elbow adaptor (includes adaptor, hose and clamps). For use with 3 1/2” or 4” I.D. exhaust hose. 20-0097 3” spacer block (complete with mounting hardware, gasket and 3/4” pipe plug). Capable of stacking. CHVA-1-84SS-P Stainless steel manifold mounting package (includes stainless bolts and brass plugs). Not pictured. CHVA-47-0000 Manifold to cylinder head gasket. Note: Manifold includes all plugs, gaskets and mounting hardware to head. Risers include plugs, gasket and mounting hardware to mount to manifold. |
CRUSADER V8-454 and 502 C.I.D
ALL MODELS DIRECT REPLACEMENT
|
Part Number and DescriptionCR-1-97992 Direct replacement starboard side manifold. Replaces Crusader part # 97992.
CR-1-97993 Direct replacement port side manifold. Replaces Crusader part # 97993. CR-20-96560 Direct replacement exhaust elbow assembly, 3” I.D. exhaust hose. Re-places Crusader part # 96560. CR-20-97169 8” riser extension. Replaces Crusader part # 97169. CR-20-97386 90 degree swivel elbow. Replaces Crusader part # 97386. CR-20-97387 Elbow, lower swivel with 3” outlet. Replaces Crusader part # 97387. CR-20-97624 Elbow, lower swivel with 4” outlet. Replaces Crusader part # 97624. CR-20-97772 4” riser extension. Replaces Crusader part # 97772. CR-20-97924 Direct replacement exhaust elbow assembly, 4” I.D. exhaust hose. Re-places Crusader part # 97924. CR-20-98068 Direct replacement exhaust elbow assembly, 3” I.D. exhaust hose. For use without Crusader spacer part # 97295. Replaces Crusader part # 98068. CHVA-47-0000 Manifold to cylinder head gasket. CR-1-9799P Manifold mounting package. Not pictured. CR-20-96560P Mounting package for CR-20-96560, CR-20-97386, CR-20-97924, and CR-20-98068. CR-20-97169P Mounting package for CR-20-97169. CR-20-97296 Stainless steel block off plate for fresh water applications. CR-20-97772P Mounting package for CR-20-97772. CR-20-96319 143 degree thermostat for Crusader (not pictured). CR47-C-96108 Replacement exhaust elbow gasket (3 hole). CR47-C-96562 Replacement exhaust elbow gasket (1 hole). CR-50-20471 Replaces Crusader part # 20471 3/8” X 5 3/4” stainless steel stud). CR-50-22032 Replaces Crusader part # 22032 (3/8” X 9 3/8” stainless steel stud). For use with OEM adaptor # 97295. CR-50-22033 Replaces Crusader part # 22033 (3/8” X 7 3/4” stainless steel stud). CR-50-96369 Replaces Crusader part # 96369 (3/8” X 4” stainless steel stud). For use with OEM adaptor # 97295. Note: Manifolds and elbows include all mounting hardware, gaskets and plugs. CR-20-97169P and CR-20-97772P must be purchased seperate for the corresponding risers. |
CRUSADER V8-302 and 351 C.I.D.
ALL MODELS CENTER RISER GENERIC
|
Part Number and DescriptionFM-1-83 Water cooled center discharge manifold to fit the small block Ford engine (3/4” N.P.T. cooling hose connections). All years.
20-0082 Water cooled center discharge riser (3/4” N.P.T. cooling hose connection). Standard for use with 3” I.D. exhaust hose. 20-0100 Water cooled center discharge riser (3/4” N.P.T. cooling hose connection). Standard for use with 4” I.D. exhaust hose. 1-0104P Adaptor package for fresh water cooled manifold (includes gaskets and block off plate). 1-0105 Center riser manifold-to-riser gasket for fresh water cooling. 1-0106P Adaptor package for raw water cooling. Used in pre-heating applications (includes gaskets and block off plate with vent hole). 1-0107 Center riser manifold-to-riser gasket (raw water cooling). 20-0082P Riser mounting package for both 20-0082 and 20-0100. 20-0082SS-P Stainless steel mounting package (with brass plugs) for both 20-0082 and 20-0100. Not pictured. 20-0084P Straight exhaust adaptor (includes adaptor, hose and clamps). For use with 3 1/2” I.D. exhaust hose. 20-0085P Straight exhaust adaptor (includes adaptor, hose and clamps). For use with 2 1/2” I.D. exhaust hose. 20-0086P 90 degree exhaust elbow adaptor (includes adaptor, hose and clamps). For use with 2 1/2” I.D. exhaust hose. 20-0087P 90 degree exhaust elbow adaptor (includes adaptor, hose and clamps). For use with 3” I.D. exhaust hose. 20-0088P 30 degree exhaust elbow adaptor (includes adaptor, hose and clamps). For use with 2 1/2” I.D. exhaust hose. 20-0089P 30 degree exhaust elbow adaptor (includes adaptor, hose and clamps). For use with 3” I.D. exhaust hose. 20-0092P 45 degree exhaust elbow adaptor (includes adaptor, hose and clamps). For use with 3” I.D. exhaust hose. 20-0093P 90 degree exhaust elbow adaptor (includes adaptor, hose and clamps). For use with 3 1/2” or 4” I.D. exhaust 20-0097 3” spacer block (complete with mounting hardware, gasket and 3/4” pipe plug). Capable of stacking. FM-1-83P Manifold mounting package (includes bolts and pipe plugs) FM-1-83SS-P Stainless steel manifold mounting package (includes stainless bolts and bras plugs). Not pictured. FM-47-0000 Manifold to cylinder head gasket. Note: Manifold includes all plugs, gaskets and mounting hardware to head. Risers include plugs, gasket and mounting hardware to mount to manifold. |
PRODUCT INSTALLATION GUIDELINES
